Close
You have no items in your shopping cart.
Search
Filters
60cm Stainless Steel and Black Glass Island Downdraft Hood
Manufacturer: Smeg
SKU: KDD60VXE-2
Manufacturer part number: KDD60VXE-2
£1,463.00

Energy rating: B

 

1 high performance motor, 270W

Electronic controls

4 speeds, plus intensive (10min)

1 x 7W LED light

2 aluminium grease filters

Filter cleaning/replacement indicator

Automatic switch-off

Internal re-circulation possible

Non return valve

Vent outlet Ø 150mm

Nominal power 277W

 

 

Speed I II III IV Int
Extraction Rate IEC 61591 135 230 295 375 570
Noise Level dB(A) IEC 60704-2-13 44 52 57 62 71

 

 

 

NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when a hob is situated in an island unit. The extractor is installed under the worktop directly behind, or to the side of, the hob so that when it is not in use, it can be completely hidden from view. A Downdraft extractor can be vented or recirculated. When it is vented the ducting has to be passed under the flooring, below the cupboards or along the back of the cupboards - it is important therefore to decide on the hood before refurbishment work begins. The length of the ducting will affect the extraction performance, if it has to travel too far to go to an outside wall or there are too many turns in the ducting you are advised to recirculate the extractor. 

 

When using with a gas hob, the hob must have a Maximum power of 12.4kW and 5 zones.

Options

  • KITRBDD - Remote motor kit allowing to position motor away from the body of the hood
  • KITFCDD - Charcoal filter kit
  • RCKF - Remote control
  • SP150 - Simple ducting kit (150mm wide)
  • SP150FLAT - Comprehensive ducting kit (150mm wide)

Energy rating: B

 

1 high performance motor, 270W

Electronic controls

4 speeds, plus intensive (10min)

1 x 7W LED light

2 aluminium grease filters

Filter cleaning/replacement indicator

Automatic switch-off

Internal re-circulation possible

Non return valve

Vent outlet Ø 150mm

Nominal power 277W

 

 

Speed I II III IV Int
Extraction Rate IEC 61591 135 230 295 375 570
Noise Level dB(A) IEC 60704-2-13 44 52 57 62 71

 

 

 

NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when a hob is situated in an island unit. The extractor is installed under the worktop directly behind, or to the side of, the hob so that when it is not in use, it can be completely hidden from view. A Downdraft extractor can be vented or recirculated. When it is vented the ducting has to be passed under the flooring, below the cupboards or along the back of the cupboards - it is important therefore to decide on the hood before refurbishment work begins. The length of the ducting will affect the extraction performance, if it has to travel too far to go to an outside wall or there are too many turns in the ducting you are advised to recirculate the extractor. 

 

When using with a gas hob, the hob must have a Maximum power of 12.4kW and 5 zones.

Options

  • KITRBDD - Remote motor kit allowing to position motor away from the body of the hood
  • KITFCDD - Charcoal filter kit
  • RCKF - Remote control
  • SP150 - Simple ducting kit (150mm wide)
  • SP150FLAT - Comprehensive ducting kit (150mm wide)